Ecs Gf8200A Motherboard Serial Devices Such
Ecs Gf8200A Motherboard Install The Memory
Ecs Gf8200A Motherboard How To Set Jumpers

Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author.

Version 1.0b Disclaimer The information in this document is subject to change without notice.

This motherboard is a high performance, enhanced function motherboard that supports socket for Phenom processor (socket AM2)AMD Athlon 64 X2 Dual-CoreAthlon Sempron processors for high-end business or personal desktop markets.

CPU Socket Athlon 64 X2 Dual-CoreAthlon 64Sempron processors 2.

Ecs Gf8200A Motherboard How To Set Jumpers

Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard.

Setting Jumpers Use the motherboard jumpers to set system configuration options.

Pin 1 is labeled.

Jumper Settings Jumper Type Description Setting (default) 1-2: NORMAL 2-3: CLEAR CLRCMOS 3-pin CLEAR CMOS Before clearing the CMOS, make sure to CLRCMOS turn the system off.

If the clip of the cooling fan scrapes across the motherboard, you may cause serious damage to the motherboard or its components.

Pull the locking lever away from the socket and raising it to the upright position.

Match the pin1 corner marked as the beveled edge on the CPU with the pin1 corner on the socket.

Ecs Gf8200A Motherboard Install The Memory

Installation Procedure Refer to the following to install the memory modules.

Type Siz e Ve ndor Module Name M378T3354BZ0-CCC Samsung 256 MB K4T51163QB-ZCCC M378T6553BG0-CCC DDR2 400 Samsung K4T51083QB-GCCC 512 MB.

Expansion slots are a means of adding or enhancing the motherboards features and capabilities.

With these efficient facilities, you can increase the motherboards capabilities by adding hardware that performs tasks that are not part of the basic system.

Install the edge connector of the add-on card into the expansion slot.

Ensure that the edge connector is correctly seated in the slot.

Secure the metal bracket of the card to the system case with a screw.

Addi- tionally, some computer cases have USB ports at the front of the case.

If you have this kind of case, use auxiliary USB connector to connect the front-mounted ports to the motherboard.

An IDE ribbon cable supporting two IDE devices is bundled with the motherboard.

Attach the SATA power cable to the SATA hard drive and connect the other end to the power supply.

PS2 Keyboard Use the lower PS2 port to connect a PS2 keyboard.

Ecs Gf8200A Motherboard Serial Devices Such

Serial Port Use the COM port to connect serial devices such as mouse (COM) or faxmodems.

Refer to the following: Connect the CPU cooling fan cable to CPUFAN.